The on-line glove integrity tester WGT-1000 produced by MedIntegrity is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves. Our company has been engaged in the production and sales of filter integrity testers for many years, and the pressure control technology is very mature.
The device uses a wireless communication mode, built-in air pump and lithium battery, through systematic management, so that multiple detection units can be linked in real time. In addition to complying with the requirements of FDA and GMP and other laws and regulations, four-level authority management and electronic signature design are also set up to comply with 21CFR part 11 electronic records and electronic signature certification requirements; The history record can store more than 12000 groups, and at the same time, it has its own storage FLASH, which can transmit and save the test records in time; the structure design is simple and exquisite, no additional equipment is required, no need to remove gloves, and the glove tray can be replaced, supporting different specifications and sizes of gloves Detection. The high-precision pressure sensor is adopted, and the glove test is fast and accurate.

HPP series cartridge filter is an advanced fixed deep cartridge filter. Its filter media is an imported PP thermal-sprayed fiber nonwoven membrane, avoiding fiber shedding problem and offering high interception efficiency. Its hierarchical filter process makes the cartridge less blocked, prolonging their service life.
Filter precision: 0.1, 0.2, 0.45, 0.65, 0.8, 1.0, 3.0, 5.0, 10, 20, 30, 60 (unit: μm)
Effective filter area: 0.4~2.0 m2 /10"
Cartridge diameter: 69 mm, 83 mm, 130 mm

※ It can't directly illuminate to a person's skin, especially a person's eyes;
※ Do not use your hand to directly contact with the tube;
※ Please wear sterile gloves before using and use alcohol to wipe the quartz tube;
※ Please contact the manufacturer in time of use;

Sterility test pump based on the principle of membrane filtration. The pump give positive pressure transmit liquid sample to the canister and filtered under positive pressure. After filtration, the filter membrane is washed to remove the antimicrobial agent of the product, and then the culture medium is filled in the filter to check whether the sample contains bacteria

The respirator filter is designed for the sterilization purposes when material pot gas exchange of the pharmaceutical industry, food industry. The vent of the material pot and the storage pot is separated by the filter, and the gas in the pot can be discharged smoothly, and the microorganisms and particulate of outside can not enter the inside. The filter is manufactured according to GMP standard. Filter selection of hydrophobic PTFE membrane, filtration accuracy of 0.01um for a variety of bacteria and phage to 99.9999% filter. This filter can do bubble point test, also be carried out online steam disinfection.

The bag integrity tester produced by NeuronAI.LLC,:BGT-120 is based on the pressure drop test principle. The method is based on the program of ASTM F2095-01, which compliance with GAMPs and FDA 21 CFR Part 11. with authority management and electronic signature, value support, including IQ, OQ, PQ and SOP.

Stainless steel filters housing fall into fixed filters and flip filters. Filter housings can be designed into upper and lower openings or left and right openings. The cartridges are made of titanium using sinter technology. Conventional connectors fall into 226 screws and M20 screws. Special specifications can be tailor made for customers based on their requirements.

The autosampler can be used with TOC analyzer in the multi sample analysis, positioning the sample level analysis automatically, so that the inspectors can be free from the boring waiting for analysis.

It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.
Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.

Uniform pore siz distribution, porosity as high as 80%, fast flow rate, the good interception, little, adsorption ,no medium fall off, the need of low working pressure.

TA-2.0 Total organic carbon (TOC) is developed on the basis of the original offline total organic carbon analysis instrument, which can meet both online and offline test modes for the users. And 3 points can be online measured switching one by one, so the application is more extensive, which can completely meet various on-site use requirements for the customers, thus greatly reducing the on-line monitoring implementation cost for the customers.