The respirator filter is designed for the sterilization purposes when material pot gas exchange of the pharmaceutical industry, food industry. The vent of the material pot and the storage pot is separated by the filter, and the gas in the pot can be discharged smoothly, and the microorganisms and particulate of outside can not enter the inside. The filter is manufactured according to GMP standard. Filter selection of hydrophobic PTFE membrane, filtration accuracy of 0.01um for a variety of bacteria and phage to 99.9999% filter. This filter can do bubble point test, also be carried out online steam disinfection.

The autosampler can be used with TOC analyzer in the multi sample analysis, positioning the sample level analysis automatically, so that the inspectors can be free from the boring waiting for analysis.

Plate type filter consist of single plate and double plate, choose high-quality stainless steel 304 or 316L stainless steel, with a pressure tank or peristaltic pump as a source of pressure, is filtered by positive pressure, in full compliance with the GMP standard of the medicine industry, applicable to small pharmaceutical factory, food and beverage, factories and hospitals for liquid clarification and filtration sterilization. With a ladder shaped hose interface, easy to use.

It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.

Titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular, they are widely used in pharmacy industry for removing carbon.

It is suitable for sealing integrity testing of pharmaceutical packaging to prevent moisture, oxygen, and microorganisms from contaminating products. Medicines: bottled, bagged, boxed, ampoules, vials, cartridges, prefilled needles (PFS), (BFS), (FFS), etc.
Spray cans: plunger spray cans; bag-lined spray cans; "energy jacket" spray cans; flexible tube spray cans.

The bag integrity tester produced by NeuronAI.LLC,:BGT-120 is based on the pressure drop test principle. The method is based on the program of ASTM F2095-01, which compliance with GAMPs and FDA 21 CFR Part 11. with authority management and electronic signature, value support, including IQ, OQ, PQ and SOP.

To meet the requirements of the new version of GMP, our company has carried out independent research and development and designed the NEH series of electronic heater jacket; The instrument is composed of high performance composite heating material and control unit, and it has been widely used in biotechnology, pharmaceutical and electronics and other fields.

Capsule filters are produced using pleated processing. Their structure is impact and filter area is large, applicable to filter solutions that have slow flow rate and large volume. Capsule filters are sealed by means of melting, free from glues and adhesives and therefore will not contaminate filtrate. They will experience 100% integrity test, purified water washing, and pressure test before delivery. Materials of capsule filters are selectable.

pharmacopoeia general chapters has strict rules for the water to check total organic carbon and the preparation of reference solution, requiring that the calibrated instrument should be used for on-line monitoring or off-line laboratory determination for the water system, this requiring that the calibration and System Suitability Verification must be carried out regularly for the TOC analyzer.

The on-line glove integrity tester WGT-1200 produced by MedIntegrity is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves.