The autosampler can be used with TOC analyzer in the multi sample analysis, positioning the sample level analysis automatically, so that the inspectors can be free from the boring waiting for analysis.

※ It can't directly illuminate to a person's skin, especially a person's eyes;
※ Do not use your hand to directly contact with the tube;
※ Please wear sterile gloves before using and use alcohol to wipe the quartz tube;
※ Please contact the manufacturer in time of use;

Glove Integrity Tester GT-5.0 is based on Gt-2.0 3.0 R&D by MedIntegrity, very mature teconlogy,it is good choice for you.

The on-line glove integrity tester WGT-1200 produced by MedIntegrity is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves.

HPP series cartridge filter is an advanced fixed deep cartridge filter. Its filter media is an imported PP thermal-sprayed fiber nonwoven membrane, avoiding fiber shedding problem and offering high interception efficiency. Its hierarchical filter process makes the cartridge less blocked, prolonging their service life.
Filter precision: 0.1, 0.2, 0.45, 0.65, 0.8, 1.0, 3.0, 5.0, 10, 20, 30, 60 (unit: μm)
Effective filter area: 0.4~2.0 m2 /10"
Cartridge diameter: 69 mm, 83 mm, 130 mm

Titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular, they are widely used in pharmacy industry for removing carbon.

Autosampler can be used with TOC analyzer in the multi samples analysis, positioning the sample level analysis automatically, so that the inspectors can be free from the boring waiting for analysis.

Uniform pore siz distribution, porosity as high as 80%, fast flow rate, the good interception, little, adsorption ,no medium fall off, the need of low working pressure.

Model：IntegtestV4.0
Introduction

V4.0 Integrity Tester are designed for testing integrity of filters and filter systems . The State Pharmacopoeia and GMP specification requirements. The V4.0 Integrity Tester is compact, handy to use, and fully automated integrity test instrument, which performs bubble point, diffusion flow, enhanced bubble point, and water-based test for hydrophobic filters.

The freezing point osmometer FPOSM-V3.0 produced by MedIntegrity with independent research and development is in accordance with Raoul freezing point theory, based on the solution freezing point declined value proportional to the solution molar concentration, using high sensitivity of temperature-sensing element, to measure the freezing point of different solutions, so as to derive the osmotic pressure molar concentration. This theory has been widely used for the test and research of osmotic pressure molar concentration in the fields such as pharmaceuticals,pharmaceutical analysis, biological and food therapy

TA-2.0 Total organic carbon (TOC) is developed on the basis of the original offline total organic carbon analysis instrument, which can meet both online and offline test modes for the users. And 3 points can be online measured switching one by one, so the application is more extensive, which can completely meet various on-site use requirements for the customers, thus greatly reducing the on-line monitoring implementation cost for the customers.