The respirator filter is designed for the sterilization purposes when material pot gas exchange of the pharmaceutical industry, food industry. The vent of the material pot and the storage pot is separated by the filter, and the gas in the pot can be discharged smoothly, and the microorganisms and particulate of outside can not enter the inside. The filter is manufactured according to GMP standard. Filter selection of hydrophobic PTFE membrane, filtration accuracy of 0.01um for a variety of bacteria and phage to 99.9999% filter. This filter can do bubble point test, also be carried out online steam disinfection.

The on-line gloves Integrity Tester GT-2.0 produced by MedIntegrity is designed according to the positive pressure leak detector principle proposed by GB/T 25915.7-2010/ISO 14644-7:2004, and it is a dedicated instrument to detect the gloves leakage. The simple and easy design won't need any additional equipment, no need to remove the gloves, with fast detection speed and high precision.

Filters are made of Micro series hydrophilic asymmetric sulfonated PES. They have universal chemical compatibility, pH range 3~11. They feature large throughput and long service life, applicable to bio-pharmacy and other fields. Before delivery, each cartridge has experienced 100% integrity test, to ensure product filter efficiency. NSS cartridges are endurable to repeated online steam or high-pressure disinfection, meeting asepsis requirements of new version GMP.

Stainless steel filters housing fall into fixed filters and flip filters. Filter housings can be designed into upper and lower openings or left and right openings. The cartridges are made of titanium using sinter technology. Conventional connectors fall into 226 screws and M20 screws. Special specifications can be tailor made for customers based on their requirements.

The freezing point osmometer FPOSM-V3.0 produced by MedIntegrity with independent research and development is in accordance with Raoul freezing point theory, based on the solution freezing point declined value proportional to the solution molar concentration, using high sensitivity of temperature-sensing element, to measure the freezing point of different solutions, so as to derive the osmotic pressure molar concentration. This theory has been widely used for the test and research of osmotic pressure molar concentration in the fields such as pharmaceuticals,pharmaceutical analysis, biological and food therapy

TA - 3.0 independent research and development by our company which is to make a tiny adjustment on the basis of TA - 2.0, where the instrument shell adopts 304 stainless steel design,greatly improving the equipment
adaptability in different environments. It can meet the choice of two different schemes for the single point of real-time monitoring or multiple point time-division monitoring, not only meeting the requirements of national laws and regulations, but also saving investment, where we have several successful cases.

Cartridge filter media is a hydrophobic PTFE membrane, applicable to pre-filtering of gas and solvent and sterilization. Its hydrophobicity is 3.75 times stronger than the erosion resistance capability of ordinary PVDF; thus, filters are applicable to pre-filtering and precise filtration of gas and solvent sterilization. At present, they are widely applied in pharmacy, food, chemical industry, and electronics, which show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. NWF cartridges also have high interception efficiency, high guarantee, and long service life.

Model：IntegtestV4.0
Introduction

V4.0 Integrity Tester are designed for testing integrity of filters and filter systems . The State Pharmacopoeia and GMP specification requirements. The V4.0 Integrity Tester is compact, handy to use, and fully automated integrity test instrument, which performs bubble point, diffusion flow, enhanced bubble point, and water-based test for hydrophobic filters.

Titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular, they are widely used in pharmacy industry for removing carbon.

Name：Full-Automatic Filter Integrity Tester


Model：IntegtestV1.1

Company：NeuronAI.LLC

※ It can't directly illuminate to a person's skin, especially a person's eyes;
※ Do not use your hand to directly contact with the tube;
※ Please wear sterile gloves before using and use alcohol to wipe the quartz tube;
※ Please contact the manufacturer in time of use;

The on-line glove integrity tester WGT-1200 produced by MedIntegrity is designed according to the principle of the positive pressure leak detector recommended by GB/T 25915.7-2010/ISO 14644-7:2004. It is a special instrument for detecting leakage of gloves.